Showing posts with label japanese push drill. Show all posts
Showing posts with label japanese push drill. Show all posts

Thursday, December 9, 2010

SIZZIX TRIPLE PLAY BLOG HOP WEEK 6: VERTICAL WALL HANGING


Here we are again! It's Week 6 of the Sizzix Triple Play Blog Hop!! I am sure you all share in my amazement that 6 weeks has flittered by so quickly. This week features a pretty spectacular die by Brenda Pinnick. Brenda, ever so generous sent over a whole mess of pieces for this project cut from paper, HER fabric, felt and this really awesome material that is really similar to burlap but with a cooler texture. I LOVE TEXTURE! I chose to stick with the material and save the paper til later. Here's what I got in my goody bag...

What was really interesting was that if you go to the Sizzix site you will see that this is intended to be an album. However, since Brenda send the positives and negatives for this die and there was so much of it, I decided to do some layering and make a cool wall hanging for my studio.

The products you will need from Sizzix to use Brenda's die are:
Paper, Mat Board or Fabric of your choosing

I have to share something right now. I think if there was going to be a secondary title for this Blog Post it would be....Confessions of a Sizzaholic! Yes, folks, I am officially hooked on these products and I've gone and bought the farm!

In creating this project, I chose to incorporate some other Sizzix dies to create the wall hanging. Now I know there are just some squares, but it was so much easier to cut them with the Sizzix dies...and, of course, the gigantic Westminster Edition of the Big Shot Pro. This is one sick machine, I tell ya! Isn't it a beauty?!?

Here are the other supplies used in this project:

Fabric
Pellon 911FF - Featherweight Fusible Web (1 sided)
Steam-a-Seam 2 - 1/2" two sided fusible web
Cord
Assorted Ribbon
Assorted Bazzill paper in coordinating colors
Low Temperature Glue Gun
Glue
Glitter
Japanese Screw Punch

Before I ran my fabric through the Big Shot Pro, I ironed on the Pellon fusible web. It is a pretty good stabilizer and makes it easier to cut the fabric. These machines are so great, I was able to run multiple layers of fabric and paper through them. What a time saver!

Once the stabilizer was attached, I ran the fabric through the machine and made my squares. Like this:

Next, I layered my fabric squares along with the pieces from Brenda's kit. I wanted each square to be different and just played until I found something that I liked. Like this:

Once I had 5 squared laid out the way I wanted them. I used the Steam-a-seam 2 between the layers and ironed them together so that they were adhered together.

Next, I laid the assembled squares out in an order that I liked.


One hole is already punched for you with this die, but I needed some extra holes to run my cord through. I punched an extra hole at the top and another at the bottom with my Japanese Screw Punch.

I ran my cord through, running it so that is mostly ran across the back of the square. I am not much for measuring (is that bad?). I am more of an "eye-baller", which is what I did to space these out appropriately.

I tied some little bows and with my hot glue gun, I glued them so that they sat just at the top of the square just covering the bottom hole. This served a couple of purposes. First, it kind of hid the hole. Second, because the glue covered part of the cord, it helped keep the square in place. For good measure, I flipped the squares over and ran a line of hot glue under the cording in the back as well.

I tied a knot in both ends of the cord so that it wouldn't unravel and a simple loop in the top. While I loved the color scheme and the texture of the fabrics, it needed a little something more, so I took some card stock in shades that complimented the colors I was already using and began to cut some flowers with my Big Shot. I cut so many flowers, I'm set for spring!

I then took half my stash and glued and glittered them up just because...honestly...who couldn't use a little sparkle? I assembled the flowers with double stick adhesive, but I glued the bottom layer to the fabric squares with hot glue.

Here are close ups of the squares. I really hope you enjoy!





That's it for this week. It's almost sad...because this means that there is only ONE week left to this blog hop. I am really grateful for this opportunity. It's been a blast!

Gotta hop.....

Theresa

Sunday, November 14, 2010

Tips, Tools and Techniques Tuesday!


Happy Tuesday everyone! Welcome to this week's installment of Tips, Tools and Techniques. This week I am going to share with you one of my very favorite and one of my most cool tools!


If you're wondering what in the heck that thing is pictured above...allow me to introduce you! This is a Japanese Push Drill (sometimes referred to as a Screw Punch) and it's purpose is to punch holes. If you don't have one, I cannot recommend it strongly enough. If you are someone who uses a lot of eyelets and brads, this is a must have tool! Now you might be saying to yourself...I already have hole punches, I don't need anymore. Well this, my crafty friends, is different.

With your average hole punches, you are limited. You can only punch a hole as far into the paper as your tool will let you, which isn't very far! Yes, there are long reach punches, but most of them won't reach into the center of a 12x12 piece of card stock. There are those really great eyelet setter kits that you have to use with a hammer, but they are noisy and everything around you shakes while you're banging the tool with your hammer! Which means a few things... first, it really isn't convenient at 2 am (you know you do it!) and second, if you are at a crop, you're table mates will get irritated quickly.

There are several benefits to adding a Japanese Push Drill to your arsenal of tools. A Japanese Push drill:
  • will punch holes anywhere
  • has assorted bits in a variety of hole sizes
  • is easy to use
  • doesn't hurt your hand
  • eliminates the need to own several punches
  • is quiet and not intrusive
  • will punch through a variety of surfaces INCLUDING (but not limited to) paper, fabric and mat board (which really comes in handy if you like to make your own books)
Allow me to give you a really quick demo:


Please....Please....be sure that you have a self healing cutting mat when using this tool. Just as you would use one with an Xacto knife, you need to protect your work surface.


Look carefully at the picture above. Down near the tip of the punch, you'll see that there is a piece that has those sort of ridges. That piece unscrews and loosens so that you can put the bits in and take them out. Once you've put a bit in and tighten it up, you're good to go.

You want to make sure that you place the punch perfectly straight up and down. The punch should be at a 90 degree angle to your work surface. You don't want the punch to be at an angle or what will happen is you will only punch one side of the hole.


Then you want to push straight down. This is all you have to do most of the time. However, if you are punching through thick card stock, mat board or multiple pieces of paper give the punch a twist while it is fully collapsed. This ensures that the punch goes all the way through.


Release the punch and it will fully extend. When you remove it from the paper or whatever you're punching, you will have a nice clean hole.

Japanese Push Drills are not difficult to find in this age of the internet. You can do a Google search or hit eBay. I recommend, however, Talas. Talas is a great resource if you are a book maker or paper artist of any kind.

Artfully yours!
Theresa
Related Posts Plugin for WordPress, Blogger...